Tips to improve PC performance in Windows (2024)

Windows 11Windows 10

If your PC is running slowly, the following suggestions might help speed things up. The tips are listed in order, so start with the first one, see if that helps, and then continue to the next one if it doesn’t.

One of the best ways to get the most out of your PC is to make sure you have the latest version of Windows 11installed. When you check for updates, your PC will also search for the latest device drivers, which can also help improve your PC’s performance.

To check for updates

  1. Select the Start button, then select Settings > Windows Update >Check for updates.

    Check for Windows updates

  2. Do one of the following:

    • If the status says "You're up to date," continue and check for optional updates.

    • If the status says "Updates are available," once they are downloaded, select Install now.

  3. Select the updates you want to install, then select Install.

  4. Restart your PC and see if it seems to run better.

Sometimes an optional update, like a new non-critical driver, will be available that may help.

To check for optional updates

  1. Select the Start button, then select Settings > Windows Update > Advanced options > Optional updates.

  2. If additional updates are available,select themand then select Download & install.

  3. Restart your PC and see if it seems to run better.

For more info about updates, including how you can have them installed automatically, see the Windows Update FAQ.

For Windows Update troubleshooting info, see Update Windowsand Troubleshoot problems updating Windows.

If your PC still runs slowly, continue to the next tip.

Having many apps, programs, web browsers, and so on open at once can slow down your PC. Having a lot of browser tabs open at once can also slow it down quite a bit. If this is happening, close any apps, browser tabs, etc., that you don't need and see if that helps speed up your PC. If it doesn't seem to help, restart your PC and then open just the apps, programs and browser windows you need.

To restart your PC

  1. Select the Start button, then select Power > Restart .

  2. After your PC restarts, open just the apps you need, then close them when you’re done.

Sometimes apps that were made for anearlier version of Windows will still run on Windows 11, but they might slow down your PC. If this happens after you open a certain program, check the software company’s website for an updated version, or run the Program Compatibility Troubleshooter.

To run the Program Compatibility Troubleshooter

  1. Select Search , type troubleshootin the search box, then select Troubleshoot settings > Other troubleshooters .

  2. Under Other, select the Run button next toProgram Compatibility Troubleshooter .

  3. Select the program that you’re having problems with, then select Next and continue through the troubleshooter.

PC still running slowly? Continue to the next tip.

ReadyBoost lets you use a removable drive, like a USB flash drive, to improve your PC’s performance without opening your PC and adding more memory (RAM). To use ReadyBoost, you’ll need a USB flash drive or a memory card that has at least 500 MB free and a high data transfer rate.

To use ReadyBoost

  1. Insert the USB flash drive into a USB port on your PC.

  2. Select File Explorer from the taskbar.

  3. Press and hold (or right-click) the USB flash drive (or SD card if you used one instead), then select Properties.

  4. Select the ReadyBoost tab, then select Use this device.
    Windows determines if the device can use ReadyBoost. If it can’t,it'll let you know.

  5. After Windows determines how much free space to use to optimize memory, select OK to reserve this spaceso ReadyBoost can use it.

    When you look at the contents of the USB flash drive in File Explorer, you’ll see a file named ReadyBoost.sfcache on the flash drive. This file shows how much space is reserved for ReadyBoost.

Note:ReadyBoost can't be used if Windows is installed on a solid state drive (SSD). An SSDis already fast,and ReadyBoost won't be able to improve its performance.

The paging file is an area on your hard disk that Windows uses like memory. There's a setting in Windows 11that manages the page file size automatically, which can help improve your PC’s performance.

To make sure automatic page file management is turned on

  1. Select Search onthe taskbar, type advanced systemin the search box, and then select View advanced system settings, which has Control panel listed underneath it.

  2. In System Properties, select the Advanced tab, then select Settings in the Performance area.

  3. In Performance Options, select the Advanced tab, then select Change in the Virtual memory area.

  4. Make sure the Automatically manage paging file size for all drives check box is selected. If it is, continue to the next tip. If it's not, select it and then restart your PC by selecting Start > Power > Restart .

Use your PC and see if it’s running better. If it’s not, try the next tip.

You may improve performance if you free some disk space on your PC.

To check for low disk space

  1. Select the Start button, then select Settings > System > Storage .

    Open Storage settings

  2. Your drives will be listed in the Storage area. Note the amount of free space and total size for each drive.

Note:If your PC is not low on space, try the next tip.

You can use Storage Sense to delete unnecessary or temporary files from your device, which can also free up space.

If you turn on Storage Sense, Windows will automatically free up space by getting rid of unnecessary files—including files in your recycle bin—when you're low on disk space or at intervals you specify. The instructions below show you how to delete temporary files and how to turn on and configure Storage Sense.

If you can't find Storage Sense on your device using the following steps, see the "Free up space with Disk cleanup" section below instead.

Note:You may not want to delete temporary files to improve performance. While these files may not be used at the moment, they help your apps load and run faster.

To delete temporary files with Storage Sense

  1. Open Settings , then select System > Storage .

    Open Storage settings

  2. Select Temporary files in the storage breakdown.

    Note:If you don't see Temporary files listed, select Show more categories.

  3. Windows will take a few moments to determine what files and apps are taking up the most space on your PC.

  4. Select the items you want to delete, and then select Remove files.

To see what's in your Recycle Bin before you empty it, open it from your desktop. If you don't see the Recycle Bin iconon your desktop, in the search bar on the taskbar, type recycle bin, then select Recycle Bin from the list of results.

Note:Windows moves files you delete to the Recycle Bin in case you change your mind and need them again in the future. You might be able to free up a significant amount of space by deleting Recycle Bin files to permanently remove files you've previously deleted.

To turn on and configure Storage Sense

  1. Open Settings , then selectSystem > Storage .

    Open Storage settings

  2. In the Storage management area, turn on Storage Sense.

  3. Select the for Storage Sense to configure it.

  4. Under Cleanup of temporary files, ensure Keep Windows running smoothly by automatically cleaning up temporary system and app files is checked.

  5. Under Configure cleanup schedules, choose how often you want Storage Sense to run.

  6. For the files you want Storage Sense to delete(your choices are files in your Recycle Bin and in your Downloads folder),select the preferred time intervals, or select Never if you want Storage Sense to leave those types of files alone.

  7. Scroll down and select Run Storage Sense now.

  8. Windows will take a few moments to clean up your files, and then you'll see a message indicating how much disk space has been freed up.

If your system doesn't have Storage Sense, you can use the Disk Cleanup tool to delete temporary files and system files from your device.

To run Disk Cleanup

  1. Select Search , type disk cleanup, then select Disk Cleanup from the list of results.

  2. Select the checkbox next to the type of files you want to delete. (To view a description of each type of file, select the name.) By default, Downloaded Program Files, Temporary Internet Files, and Thumbnails are selected. Be sure to clear those check boxes if you don't want to delete those files.

  3. To free up even more space, select Clean up system files. Disk Cleanup will take a few moments to calculate the amount of space that a can be freed up.

    Note:If it’s been fewer than 10 days since you upgraded to Windows 11, your previous version of Windows will be listed as a system file you can delete. If you need to free up drive space, you can delete it, but keep in mind that you'll be deleting your Windows.old folder, which contains files that give you the option to go back to your previous version of Windows. If you delete your previous version of Windows, this can't be undone. (You won't be able to go back to your previous version of Windows.)

  4. Select the types of files you want to delete, select OK, then select Delete files in the confirmation window to start the cleanup.

If your PC still runs slowly, try uninstalling apps you don't use anymore.

To uninstall apps you don’t use anymore

  1. Select the Start button, then select Settings > Apps > Installed apps.

  2. Search for a specific app or sort them to see which ones are usingthe most space.

  3. When you find an app to remove, select the More icon next to it and, if possible, select Uninstall.

  4. Restart your PC andsee if performance has improved.

If your PC still runs slowly, try moving files to another drive.

If you have photos, music, or other files that you want to keep but don't use often, consider saving them to removable media, like a USB drive. You'll still be able to use them when the drive is connected, but they won't take up space on your PC.

To move files to another drive

  1. Connect the removable media to your PC.

  2. Select File Explorerfrom the taskbar and find the files you want to move.

  3. Select the files, then on the taskbar, select Cut .

  4. Select your removable media from the location list, then select Paste .

  5. When the move is complete, restart your PC and see if performance has improved.

Get more info about freeing drive space in Windows.

If your PC still runs slowly, try the next tip.

Windows 11 includes many visual effects, such as animations and shadow effects. These look great, but they can also use additional system resources and can slow down your PC. This is especially true if you have a PC with a smaller amount of memory (RAM).

To adjust the visual effects in Windows

  1. Select Search , type performance, then select Adjust the appearance and performance of Windows in the list of results.

  2. On the Visual Effects tab, select Adjust for best performance > Apply.

  3. Restart your PC and see if that speeds up your PC.

If your PC still runs slowly, continue to the next tip.

Your PC settings let you choose where files will be saved by default. You can save files on your PC or to OneDrive by default and sync files between the two locations. This lets you get to your files from any device that can connect to the internet, and it helps make sure your files are backed up in case your PC is ever damaged or lost. However, filesmust sync between your PC and OneDrive, and syncing can slow down your PC. You can pause OneDrive syncing temporarily and see if it helps improve your PC performance.

To pause syncing to OneDrive

  1. On the taskbar, look forOneDrive near the notification area.

  2. SelectOneDrive > Help & Settings > Pausesyncing,and then choose how long you want to pause syncing your files.

  3. Restart your PC and see if your performance issues have improved with syncing paused.

  4. To resume syncing your files, select OneDrive > Help & Settings > Resume syncing.

You can alsovisitFix OneDrive sync problemsto check for any sync issues.

When you turn on your PC, some programs start automatically and run in the background. You can disable these programs so they don’t run when your PC starts.

Many programs are designed to start automatically when Windows does. You don’t realize they're running, but they'll open quickly when you go to use them. This is helpful for programs you use a lot, but not for programs you don’t use often because it increases the time it takes Windows to start.

Find the programs that start automatically

Sometimes you candetermine which programs start automatically by looking at the program icons in the notification area on the far right of the taskbar. Check there first to see if there are any programs running that you don’t want to start automatically. To try to find out the name of the program, point to the icon with your mouse pointer. Make sure you select Show hidden icons , so you don’t miss any programs.

Even after you check the notification area, you might still miss some programs that run automatically at startup. Here’s how you can find all the programs that start automatically, and stop the ones that you don’t want to start automatically when Windows starts.

To stop a program from starting automatically

  1. Select the Start button, then selectSettings >Apps >Startup .

    Open Startup Apps settings

  2. In the Startup Apps area, find the program you want to stop from starting automatically and set it toOff.

Note:If you turn off a program and it continues to start automatically when Windows starts, you should scan for viruses and malware.Seethe next section for more info.

A virus, malware, ormalicious software could cause your PC to run slowly. Other symptoms include unexpected pop-up messages, programs that unexpectedly start automatically, or the sound of your hard disk constantly working.

The best way to handle viruses and malicious software is to try to prevent themby running antimalware and antivirus software and keeping it up to date. However, even if you take precautions, your PC can still become infected.

You can scan your PC for viruses or other malicious software by using Windows Security (formerly Windows Defender Security Center), which is included in Windows 11. For more info, seeHow to protect your Windows PC.

Notes:

  • If you’re using other antivirus or anti-malware software,see the documentation for that program to learn how to scan for viruses. Also, make sure multiple antivirus programs aren’t running at the same time. If they are,choose the one you want to run, and then disable or uninstall any others.

  • If you have another antivirus program installed and turned on, Windows Security will be turned off by default.

To scan for viruses using Windows Security

  1. Select Start > Settings > Privacy & security > Windows Security , and then selectOpen Windows Security.

    Open Windows Security settings

  2. Select Virus & threat protection, then select Protection updatesunder Virus & threat protection updates.

  3. On the Protection updates screen, select Check for updates to make sure you have the most recent updates.

  4. Select Virus & threat protection, then select Quick scan.

    Wait for Windows Security to finish scanning for viruses and malware.

  5. Do one of the following, depending on the results of the scan:

    • Run the recommended advanced scan. This scan takes longer but searches more extensively for threats on your PC.

    • If Windows Security finds a virus or malware and can’t remove or quarantine it, contact Microsoft Support for help.

    • If no viruses are found, restart your PC and try to reproduce the performance problem you were having with your PC.

Note:If Windows Security doesn’t open, can’t update the definition file, or can’t finish scanning for viruses, try running Microsoft Defender Antivirus (offline scan), which is explained below.

To scan for malware and viruses with Microsoft Defender Antivirus (offline scan)

  1. Save any documents or anything else you might have open on your PC.

  2. SelectStart > Settings > Privacy & security > Windows Security , and then selectOpen Windows Security.

    Open Windows Security settings

  3. Select Virus & threat protection, and then under Current threats, select Scan options > Microsoft Defender Antivirus (offline scan)> Scan now.

    Your PC will restart, and Microsoft Defender Antivirus (offline scan) will run and scan for viruses and malware. The scan might take 15 minutes or so, and your PC will restart again after that.

  4. Try to reproduce the performance issue.

If your PC still runs slowly, continue to the next tip.

Restoring your PC undoes recent changes that might be causing problems. If you think a recently installedapp, driver, or update for Windows could be causing problems, you might get things running normally again by restoring your PC to an earlier point, called a restore point.

Notes:

  • Restoring from a restore point won’t affect your personal files, but it will remove apps, drivers, and updates that were installed after the restore point was created.

  • System restore works for changes made in the last 7 to 14 days.

To restore your PC from a restore point

  1. Select Search on the taskbar, type advanced system, then select View advanced system settingsfrom the list of results.

  2. On the System Protection tab, select System Restore.

  3. Select Recommended restore to go with the most recent restore point Windows has made automatically, or Choose a different restore point to select one yourself, then selectNext.

  4. If you chose to select a different restore point, select one, then select Next. Either way, select Finish to begin restoring.

  5. Once the restore is completed, restart your PC and see if performance has improved.

If you don’t see any restore points, it might be because system protection isn’t turned on.

To turn on system protection

  1. In the search box on the taskbar, type create a restore point, then select Create a restore point from the list of results.

  2. On the System Protection tab, select Configure.

  3. Select Turn on system protection > OK.

If your PC is running slowly, the following suggestions might help speed things up. The tips are listed in order, so start with the first one, see if that helps, and then continue to the next one if it doesn’t.

One of the best ways to get the most out of your PC is to make sure you have the latest version of Windows 10 installed. When you check for updates, your PC will also search for the latest device drivers, which can also help improve your PC’s performance.

To check for updates

  1. Select the Start button, then select Settings > Update & Security > Windows Update > Check for updates.

    Check for Windows updates

  2. Do one of the following:

    • If the status says "You're up to date," go to the next tip.

    • If the status says "Updates are available," select Install now.

  3. Select the updates you want to install, then select Install.

  4. Restart your PC and see if it seems to run better.

For more info about updates, including how you can have them installed automatically, see the Windows Update FAQ.

For Windows Update troubleshooting info, see Update Windows 10 and Troubleshoot problems updating Windows 10.

If your PC still runs slowly, continue to the next tip.

Having many apps, programs, web browsers, and so on open at once can slow down your PC. Having a lot of browser tabs open at once can also slow it down quite a bit. If this is happening, close any apps, browser tabs, etc., that you don't need and see if that helps speed up your PC. If it doesn't seem to help, restart your PC and then open just the apps, programs and browser windows you need.

To restart your PC

  1. Select the Startbutton, then select Power > Restart.

  2. After your PC restarts, open just the apps you need, then close them when you’re done.

Sometimes apps that were made for anearlier version of Windows will still run on Windows 10, but they might slow down your PC. If this happens after you open a certain program, check the software company’s website for an updated version, or run the Program Compatibility Troubleshooter.

To run the Program Compatibility Troubleshooter

  1. In the search box on the taskbar, type troubleshoot, then select Troubleshoot settings, which hasSystem settingslisted underneath it.

  2. In the list of troubleshooters, select Program Compatibility Troubleshooter > Run the troubleshooter.

  3. Select the program that you’re having problems with, then select Next and continue through the troubleshooter.

PC still running slowly? Continue to the next tip.

ReadyBoost lets you use a removable drive, like a USB flash drive, to improve your PC’s performance without opening your PC and adding more memory (RAM). To use ReadyBoost, you’ll need a USB flash drive or a memory card that has at least 500 MB free and a high data transfer rate.

To use ReadyBoost

  1. Insert the USB flash drive into a USB port on your PC.

  2. Select File Explorer from the taskbar.

  3. Press and hold (or right-click) the USB flash drive (or SD card if you used one instead), then select Properties.

  4. Select the ReadyBoost tab, then select Use this device.
    Windows determines if the device can use ReadyBoost. If it can’t,it'll let you know.

  5. After Windows determines how much free space to use to optimize memory, select OK to reserve this spaceso ReadyBoost can use it.

    When you look at the contents of the USB flash drive in File Explorer, you’ll see a file named ReadyBoost.sfcache on the flash drive. This file shows how much space is reserved for ReadyBoost.

Note:ReadyBoost can't be used if Windows is installed on a solid state drive (SSD). An SSDis already fast,and ReadyBoost won't be able to improve its performance.

The paging file is an area on your hard disk that Windows uses like memory. There's a setting in Windows 10 that manages the page file size automatically, which can help improve your PC’s performance.

To make sure automatic page file management is turned on

  1. In the search box on the taskbar, type advanced system, and then select View advanced system settings, which has Control panel listed underneath it.

  2. In System Properties, select the Advanced tab, then select Settings in the Performance area.

  3. In Performance Options, select the Advanced tab, then select Change in the Virtual memory area.

  4. Make sure the Automatically manage paging file size for all drives check box is selected. If it is, continue to the next tip. If it's not, select it and then restart your PC by selecting the Start button > Power >Restart.

Use your PC and see if it’s running better. If it’s not, try the next tip.

You may improve performance if you free some disk space on your PC.

To check for low disk space

  1. Select the Start button, then select Settings >System > Storage .

    Open Storage settings

  2. Your drives will be listed in the Storage area. Note the amount of free space and total size for each drive.

Note:If your PC is not low on space, try the next tip.

You can use Storage Sense to delete unnecessary or temporary files from your device, which can also free up space.

If you turn on Storage Sense, Windows will automatically free up space by getting rid of unnecessary files—including files in your recycle bin—when you're low on disk space or at intervals you specify. The instructions below show you how to delete temporary files and how to turn on and configure Storage Sense.

If you can't find Storage Sense on your device using the following steps, see the "Free up space with Disk cleanup" section below instead.

Note:You may not want to delete temporary files to improve performance. While these files may not be used at the moment, they help your apps load and run faster.

To delete temporary files with Storage Sense

  1. Select the Start button, then select Settings > System > Storage .

    Open Storage settings

  2. Select Temporary files in the storage breakdown.

    Note:If you don't see Temporary files listed, select Show more categories.

  3. Windows will take a few moments to determine what files and apps are taking up the most space on your PC.

  4. Select the items you want to delete, and then select Remove files.

To see what's in your Recycle Bin before you empty it, open it from your desktop. If you don't see the Recycle Bin iconon your desktop, in the search bar on the taskbar, type recycle bin, then select Recycle Bin from the list of results.

Note:Windows moves files you delete to the Recycle Bin in case you change your mind and need them again in the future. You might be able to free up a significant amount of space by deleting Recycle Bin files to permanently remove files you've previously deleted.

To turn on and configure Storage Sense

  1. Select the Startbutton, then select Settings > System> Storage .

    Open Storage settings

  2. In the Storage area, turn on Storage Sense.

  3. Select Configure Storage Sense or run it now.

  4. In the Storage Sense area, choose how often you want Storage Sense to run.

  5. In the Temporary Files area, select Delete temporary files that my apps aren't using.

  6. Select which files you want Storage Sense to delete (your choices are files in your Recycle Bin and in your Downloads folder), then select the corresponding time intervals.

  7. Scroll down and select Clean now.

  8. Windows will take a few moment to clean up your files, and then you'll see a message indicating how much disk space has been freed up.

If your system doesn't have Storage Sense, you can use the Disk Cleanup tool to delete temporary files and system files from your device.

To run Disk Cleanup

  1. In the search box on the taskbar, type disk cleanup, then select Disk Cleanup from the list of results.

  2. Select the checkbox next to the type of files you want to delete. (To view a description of each type of file, select the name.) By default, Downloaded Program Files, Temporary Internet Files, and Thumbnails are selected. Be sure to clear those check boxes if you don't want to delete those files.

  3. To free up even more space, select Clean up system files.Disk Cleanup will take a few moments to calculate the amount of space that a can be freed up.

    Note:If it’s been fewer than 10 days since you upgraded to Windows 10, your previous version of Windows will be listed as a system file you can delete. If you need to free up drive space, you can delete it, but keep in mind that you'll be deleting your Windows.old folder, which contains files that give you the option to go back to your previous version of Windows. If you delete your previous version of Windows, this can't be undone. (You won't be able to go back to your previous version of Windows.)

  4. Select the types of files you want to delete, select OK, then select Delete files in the confirmation window to start the cleanup.

If your PC still runs slowly, try uninstalling apps you don't use anymore.

To uninstall apps you don’t use anymore

  1. Select the Start button, then select Settings > Apps> Apps & features.

  2. Search for a specific app or sort them to see which ones are usingthe most space.

  3. When you find an app to remove,choose it from the list and select Uninstall.

  4. Restart your PC andsee if performance has improved.

If your PC still runs slowly, try moving files to another drive.

If you have photos, music, or other files that you want to keep but don't use often, consider saving them to removable media, like a USB drive. You'll still be able to use them when the drive is connected, but they won't take up space on your PC.

To move files to another drive

  1. Connect the removable media to your PC.

  2. Select File Explorer from the taskbar and find the files you want to move.

  3. Select the files, go toHome,then select Move to >Choose location.

  4. Select your removable media from the location list, then select Move.

  5. Restart your PC and see if performance has improved.

Get more info about freeing drive space in Windows 10.

If your PC still runs slowly, try the next tip.

Windows 10 includes many visual effects, such as animations and shadow effects. These look great, but they can also use additional system resources and can slow down your PC. This is especially true if you have a PC with a smaller amount of memory (RAM).

To adjust the visual effects in Windows

  1. In the search box on the taskbar, type performance, then select Adjust the appearance and performance of Windows in the list of results.

  2. On the Visual Effects tab, select Adjust for best performance > Apply.

  3. Restart your PC and see if that speeds up your PC.

If your PC still runs slowly, continue to the next tip.

Your PC settings let you choose where files will be saved by default. You can save files on your PC or to OneDrive by default and sync files between the two locations. This lets you get to your files from any device that can connect to the internet, and it helps make sure your files are backed up in case your PC is ever damaged or lost. However, filesmust sync between your PC and OneDrive, and syncing can slow down your PC. You can pause OneDrive syncing temporarily and see if it helps improve your PC performance.

To pause syncing to OneDrive

  1. On the taskbar, look forOneDrive near the notification area.

  2. SelectOneDrive>More> Pausesyncing,and then choose how long you want to pause syncing your files.

  3. Restart your PC and see if your performance issues have improved with syncing paused.

  4. To resume syncing your files, select OneDrive>More>Resume syncing.

You can alsovisitFix OneDrive sync problemsto check for any sync issues.

Notes:

  • If you have Window 10 version 1709 or higher, you can use OneDrive Files On-Demand to choose which files you want to sync and always keep on your PC. This can help improve PC performance if you reduce the number of files that are synced to your PC. To see which version of Windows 10 your device is currently running, select the Startbutton, then select Settings > System> About.
    Open About settings

  • For more info on OneDrive Files On-Demand, see Learn about OneDrive Files On-Demand.

When you turn on your PC, some programs start automatically and run in the background. You can disable these programs so they don’t run when your PC starts.

Many programs are designed to start automatically when Windows does. You don’t realize they're running, but they'll open quickly when you go to use them. This is helpful for programs you use a lot, but not for programs you don’t use often because it increases the time it takes Windows to start.

Find the programs that start automatically

Sometimes you candetermine which programs start automatically by looking at the program icons in the notification area on the far right of the taskbar. Check there first to see if there are any programs running that you don’t want to start automatically. To try to find out the name of the program, point to the icon with your mouse pointer. Make sure you select Show hidden icons , so you don’t miss any programs.

Tips to improve PC performance in Windows (1)

Notification area with mouse pointing to show hidden icons

Even after you check the notification area, you might still miss some programs that run automatically at startup. Here’s how you can find all the programs that start automatically, and stop the ones that you don’t want to start automatically when Windows starts.

To stop a program from starting automatically

  1. Select the Start button, then selectSettings>Apps>Startup.

    Open Startup Apps settings

  2. In the Startup Apps area, find the program you want to stop from starting automatically and set it toOff.

Notes:

  • If you turn off a program and it continues to start automatically when Windows starts, you should scan for viruses and malware.Seethe next section for more info.

  • To use the procedure above to stop a program from starting automatically, you need to have Windows 10 (Version 1803 or higher) installed. To see which version of Windows 10 your device is currently running, select the Startbutton, then select Settings> System > About.
    Open About settings

  • If you have Windows 10 (Version 1709 or earlier) installed, press Ctrl + Alt + Delete, select Task Manager, select Startup, select the program you want to stop from starting automatically, then select Disable.

A virus, malware, ormalicious software could cause your PC to run slowly. Other symptoms include unexpected pop-up messages, programs that unexpectedly start automatically, or the sound of your hard disk constantly working.

The best way to handle viruses and malicious software is to try to prevent themby running antimalware and antivirus software and keeping it up to date. However, even if you take precautions, your PC can still become infected.

You can scan your PC for viruses or other malicious software by using Windows Security (formerly Windows Defender Security Center), which is included in Windows 10. For more info, seeHow to protect your Windows 10 PC.

Notes:

  • If you’re using other antivirus or anti-malware software,see the documentation for that program to learn how to scan for viruses. Also, make sure multiple antivirus programs aren’t running at the same time. If they are,choose the one you want to run, and then disable or uninstall any others.

  • If you have another antivirus program installed and turned on, Windows Security will be turned off by default.

To scan for viruses using Windows Security (Windows 10 Version 1809 or later)

  1. Select Start > Settings > Update & Security > Windows Security and then selectOpen Windows Security.

    Open Windows Security settings

  2. Select Virus & threat protection, then select Check for updates under Virus & threat protection updates.

  3. On the Protection updates screen, select Check for updates to make sure you have the most recent updates.

  4. Select Virus & threat protection, then select Quick scan.

    Wait for Windows Security to finish scanning for viruses and malware.

  5. Do one of the following, depending on the results of the scan:

    • Run the recommended advanced scan. This scan takes longer but searches more extensively for threats on your PC.

    • If Windows Security finds a virus or malware and can’t remove or quarantine it, contact Microsoft Support for help.

    • If no viruses are found, restart your PC and try to reproduce the performance problem you were having with your PC.

Notes:

  • If Windows Security doesn’t open, can’t update the definition file, or can’t finish scanning for viruses, try running Windows Defender Offline, which is explained below in To scan for malware and viruses with Windows Defender Offline (Windows 10 Version 1809 or later).

  • To see which version of Windows 10 your device is currently running, select the Startbutton, then select Settings > System > About.
    Open About settings

To scan for viruses using Windows Defender Security Center (Windows 10 Version 1803)

  1. SelectStart > Settings > Update & Security > Windows Security and then selectOpen Windows Defender Security Center.

    Open Windows Security settings

  2. Select Virus & threat protection, then select Virus & threat protection updates > Check for updates to make sure you have the latest definition file.

  3. Select theVirus & threat protection tab, then select Scan now.

    Wait for Windows Defender Security Center to finish scanning for viruses and malware.

  4. Do one of the following, depending on the results of the scan:

    • Run the recommended advanced scan. This scan takes longer but searches more extensively for threats on your PC.

    • If Windows Defender Security Center finds a virus or malware and can’t remove or quarantine it, contact Microsoft Support for help.

    • If no viruses are found, restart your PC and try to reproduce the performance problem you were having with your PC.

Notes:

  • If Windows Defender Security Center doesn’t open, can’t update the definition file, or can’t finish scanning for viruses, try running Windows Defender in Offline Mode, which is explained below in To scan for malware and viruses with Windows Defender Offline (Windows 10 Version 1803).

  • To see which version of Windows 10 your device is currently running, select the Startbutton, then select Settings > System > About.
    Open About settings

To scan for malware and viruses with Windows Defender Offline (Windows 10 Version 1809 or later)

  1. Save any documents or anything else you might have open on your PC.

  2. SelectStart > Settings > Update & Security > Windows Security and then selectOpen Windows Security.

    Open Windows Security settings

  3. Select Virus & threat protection, and then under Current threats, select Scan options > Windows Defender Offline scan > Scan now.

    Your PC will restart, and Windows Defender Offline will run and scan for viruses and malware. The scan might take 15 minutes or so, and your PC will restart again after that.

  4. Try to reproduce the performance issue.

If your PC still runs slowly, continue to the next tip.

To scan for malware and viruses with Windows Defender Offline (Windows 10 Version 1803)

  1. Save any documents or anything else you might have open on your PC.

  2. SelectStart > Settings > Update & Security > Windows Security and then selectOpen Windows Defender Security Center.

    Open Windows Security settings

  3. Select Virus & threat protection, then select Run a new advanced scan > Windows Defender Offline scan > Scan now.

    Your PC will restart, and Windows Defender Offline will run and scan for viruses and malware. The scan might take 15 minutes or so, and your PC will restart again after that.

  4. Try to reproduce the performance issue.

If your PC still runs slowly, continue to the next tip.

Restoring your PC undoes recent changes that might be causing problems. If you think a recently installedapp, driver, or update for Windows could be causing problems, you might get things running normally again by restoring your PC to an earlier point, called a restore point.

Notes:

  • Restoring from a restore point won’t affect your personal files, but it will remove apps, drivers, and updates that were installed after the restore point was created.

  • System restore works for changes made in the last 7 to 14 days.

To restore your PC from a restore point

  1. In the search box on the taskbar, type restore point, then select Create a restore point from the list of results.

  2. On the System Protection tab, select System Restore.

  3. Select Next, thenchoose the restore point related to the app, driver, or update that might be causing the problem.Then selectNext > Finish.

  4. Restart your PC and see if performance has improved.

If you don’t see any restore points, it might be because system protection isn’t turned on.

To turn on system protection

  1. In the search box on the taskbar, type restore point, then select Create a restore point from the list of results.

  2. On the System Protection tab, select Configure.

  3. Select Turn on system protection > OK.

Tips to improve PC performance in Windows (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Kerri Lueilwitz

Last Updated:

Views: 5911

Rating: 4.7 / 5 (47 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Kerri Lueilwitz

Birthday: 1992-10-31

Address: Suite 878 3699 Chantelle Roads, Colebury, NC 68599

Phone: +6111989609516

Job: Chief Farming Manager

Hobby: Mycology, Stone skipping, Dowsing, Whittling, Taxidermy, Sand art, Roller skating

Introduction: My name is Kerri Lueilwitz, I am a courageous, gentle, quaint, thankful, outstanding, brave, vast person who loves writing and wants to share my knowledge and understanding with you.